Deity Connect Interview Kit

The Deity Connect Interview Kit is a dual-channel, true diversity wireless system offering a host of high-end features, bodypack and plug-on transmitters, and everything you need to produce broadcast-quality sound for your next interview or narrative shoot. The Deity Connect Interview Kit offers advanced technology, robust durability and the extensive customization required for reliable, high-quality results. Knowing that a strong and solid audio link is crucial for professional results, the Deity Connect was designed as a bidirectional transceiver system with adaptive frequency hopping, "Listen-Before-Talk" stream repair, and encrypted, uncompressed digital signal integrity.

The receiver has four antennas - two internal dipole horizontal antennas, and two external elbow antennas - to allow versatile positioning and deliver uninterrupted signal reception. Through its OLED screen and straightforward buttons, the receiver provides comprehensive remote control of each transmitter; no more walking over to your subject to adjust transmitter settings! There are two gain-adjustable 3.5mm TRS outputs, which can be utilized in any of the three output modes-XLR mode sends a separate audio channel as a balanced signal to each output jack, DSLR mode mixes both audio channels to one output and turns the other jack into a headphone output, while Stereo mode routes a stereo feed from each transmitter to separate outputs.

In addition to having the same OLED screen and user-friendly menu navigation as the receiver, the transmitters grant thorough control of your signal quality via automatic or manual RF power adjustment, switchable analogue limiters, low-cut filters, and high-frequency boosts; tame peaks, reduce rumble, enhance clarity, and more. The locking 3.5mm TRS input jack on each transmitter conforms to the Sennheiser-standard pin configuration and can be set to accept a mono mic signal or a stereo line-level source for camera hopping.

The transmitters and receiver boast 10 hours of operating time at 100mW (more time at lower mW settings) via internal lithium batteries, which recharge in about an hour via USB Type-C connections. If you want efficiency and versatility without sacrificing quality, make the Deity Connect Interview Kit your wireless audio solution.

Features of the Deity Connect Interview Kit

• Dual-channel wireless system
• 2.4 GHz ecosystem with proprietary advancements for strong audio linkup while coexisting with other devices in the same frequency band
• Bidirectional transceiver system is constantly scanning and mapping out the 2.4 GHz band, coordinating and planning the next 70 frequency hops to avoid RF interference
• "Listen-Before-Talk" mechanism detects RF interruption then adds missing audio and data into the stream without increasing system latency
• Dual true diversity design - as found in commercial-grade Wi-Fi and high-end drones - ensures reliable signal delivery
• Encrypted 24-bit / 48 kHz signal transmission
• Easy pairing and configuration
• Powered via internal lithium batteries for up to 10 hours at 100mW RF output power
• Recharges via USB Type-C connections in about an hour
• Up to 500 battery cycles
• Latency: 19 ms

In the box

• Deity Microphones Deity Connect Interview Kit 2-Person Wireless Combo Microphone System (2.4 GHz)
• DUO-RX Dual-Channel Receiver
• BP-TX Bodypack Transmitter
• 2x Lavalier Microphones
• 2x XLR to 3.5mm Cables
• DSLR Locking Audio Cable
• DUO-RX Sync Cable
• USB Type-C Charging Cable
• USB Type-C to USB Type-A Firmware Update Adapter
• Transmitter Antenna
• 2x Receiver Elbow Antennas
• 2x Foam Windscreens
• 2x Lavalier Tie Clips
• Cold Shoe to 1/4"-20 Adapter
• Waterproof Hardshell Case