- Cable length: 3' (91.5 cm)
- From 1/8" (3.5 mm) stereo Miniphone
- To Nikon MC-DC2 Remote shutter release terminal
- International Catalog Number: N-MCDC2-ACC
PocketWizard Compatibility:
- PlusX
- Plus III
- FlexTT5
- MultiMAX with ACC port to a Nikon 10-pin remote shutter release terminal
- Use the N-MCDC2-P or N-MCDC2 for the Plus II, older MultiMAX, or other PocketWizard radios
Compatible with the following radios:
-PlusX: Use this cable with the PlusX to trigger the camera.
-Plus III: Use this cable with the Plus III’s exclusive 2-stage trigger to wake-up or focus your remote camera just like using the camera’s shutter release button.
-FlexTT5: This cable is required for relay mode with E-TTL, or other remote triggering with the FlexTT5. Learn more here. You can use a –P cable or standard cable with a FlexTT5, but your remote camera will not be able to relay an E-TTL signal to Speedlites. The FlexTT5 does not support the 2-stage trigger function.
-MultiMAX with –ACC port: Enable a remote zone with your hand-held MultiMAX, and your remote MultiMAX will wake up its remote camera with this cable. As long as the zone is turned on, the remote camera will stay awake and respond more quickly and consistently, but also consume the camera's batteries much more quickly. When the remote zone is disabled, the camera will enter its normal sleep modes. The MultiMAX does not support the 2-stage trigger function.
Compatible with cameras using Nikon's MC-DC2 remote terminal including:
- D90
- D600
- D3100
- D3200
- D5000
- D5100
- D5200
- D7000
Not for Nikon D70s or D80-use NM4-ACC instead.
