Rammount V-Shape Base 1" Ball
The Ram UNPKD V Base Ball and Straps consists of a 1" diameter rubber ball connected at right angles to a v-shaped base. It is suitable for rails from 1 inch to 2.1 inches in diameter.
33. 99
This product is purchased exclusively for you.
The Ram UNPKD V Base Ball and Straps consists of a 1" diameter rubber ball connected at right angles to a v-shaped base. It is suitable for rails from 1 inch to 2.1 inches in diameter.
Reviews
Description
The Rammount V-Shape Base 1" Ball consists of a rubber ball with a 1-inch (2.54 cm) diameter, connected at a right angle to a v-shaped base. The Rammount V-Shape Base 1" Ball fits rails with a diameter from 1 inch (2.54 cm) to 2.1 inch (5.33 cm). To mount the RAM-B-108BU base, place the saddle shaped plate on the rail, then wrap the metal clamp strap around the rail and plate. Tighten the screw knob on the metal strap with a screw driver, until the strap has a firm hold on the rail. The V-Shape Base 1" Ball is an alternative mounting base for Beechcraft airplanes with a "throw over yoke".
Features of the Rammount V-Shape Base 1" Ball
- Rubber ball connected to a v-shaped base
- Fits rails with a diameter of 2.54 to 5.33 cm
- Mounting base for rails and yokes
- Rammount V-Shape Base 1" Ball
In the box
- Metal strap (15.24 cm)
- Metal strap (20.32 cm)
- Rubber strip (14 cm) to avoid scratching of the rail
The Rammount V-Shape Base 1" Ball consists of a rubber ball with a 1-inch (2.54 cm) diameter, connected at a right angle to a v-shaped base. The Rammount V-Shape Base 1" Ball fits rails with a diameter from 1 inch (2.54 cm) to 2.1 inch (5.33 cm). To mount the RAM-B-108BU base, place the saddle shaped plate on the rail, then wrap the metal clamp strap around the rail and plate. Tighten the screw knob on the metal strap with a screw driver, until the strap has a firm hold on the rail. The V-Shape Base 1" Ball is an alternative mounting base for Beechcraft airplanes with a "throw over yoke".
Features of the Rammount V-Shape Base 1" Ball
- Rubber ball connected to a v-shaped base
- Fits rails with a diameter of 2.54 to 5.33 cm
- Mounting base for rails and yokes
- Rammount V-Shape Base 1" Ball
In the box
- Metal strap (15.24 cm)
- Metal strap (20.32 cm)
- Rubber strip (14 cm) to avoid scratching of the rail
Specifications
General | |
---|---|
Article number | 12200324 |
Power plug |
General | |
---|---|
Article number | 12200324 |
Power plug |