Valoi easy35 APS Holder
The Valoi easy35 APS Holder allows you to scan APS film that is 24 mm wide and has a frame size of 30.2 x 16.9 mm (APS-H format) or smaller. The holder fits the easy35 system.
€ 27. 00
This product is purchased exclusively for you.
The Valoi easy35 APS Holder allows you to scan APS film that is 24 mm wide and has a frame size of 30.2 x 16.9 mm (APS-H format) or smaller. The holder fits the easy35 system.
Reviews
Description
Valoi easy35 APS Holder
The Valoi easy35 APS Holder allows you to scan APS film that is 24 mm wide and has a frame size of 30.2 x 16.9 mm (APS-H format) or smaller. The holder fits into the easy35 system, just like any other compatible holder, by sliding out the existing holder and inserting this new one.
The dimensions of the port are approximately: 33.2 mm long and 21.4 mm wide, so you can see the whole frame and part of the rebate area around it. Valoi easy35 holders work by feeding the film through a thin slit that goes through the entire holder and comes out the other side. This way, you can easily push or pull the film all the way through, saving time and effort compared to a traditional clamshell holder.
All Valoi holders use a double S-curve design, where the slit through which the film passes bends before and after the scanning port.
By bending the film slightly in one direction on both sides, greater flatness is achieved than would be possible with a straight slit.
Features of the Valoi easy35 APS Holder
- Compatible with APS film
- Great flatness of the film
- Shows the entire frame
- Fits into the easy35 system
- Gate width: 33.2 mm
- Gate length: 21.4 mm
- Double S-curve design for great flatness
- Tight 0.4 mm film track for improved flatness
- Length: 80 mm
- Width: 60 mm
- Height: 12 mm
- Weight: 24 g
Package contents
- 1x Valoi easy35 APS Holder
Valoi easy35 APS Holder
The Valoi easy35 APS Holder allows you to scan APS film that is 24 mm wide and has a frame size of 30.2 x 16.9 mm (APS-H format) or smaller. The holder fits into the easy35 system, just like any other compatible holder, by sliding out the existing holder and inserting this new one.
The dimensions of the port are approximately: 33.2 mm long and 21.4 mm wide, so you can see the whole frame and part of the rebate area around it. Valoi easy35 holders work by feeding the film through a thin slit that goes through the entire holder and comes out the other side. This way, you can easily push or pull the film all the way through, saving time and effort compared to a traditional clamshell holder.
All Valoi holders use a double S-curve design, where the slit through which the film passes bends before and after the scanning port.
By bending the film slightly in one direction on both sides, greater flatness is achieved than would be possible with a straight slit.
Features of the Valoi easy35 APS Holder
- Compatible with APS film
- Great flatness of the film
- Shows the entire frame
- Fits into the easy35 system
- Gate width: 33.2 mm
- Gate length: 21.4 mm
- Double S-curve design for great flatness
- Tight 0.4 mm film track for improved flatness
- Length: 80 mm
- Width: 60 mm
- Height: 12 mm
- Weight: 24 g
Package contents
- 1x Valoi easy35 APS Holder
Specifications
| Info | |
|---|---|
| Article number | 12521877 |
| Info | |
|---|---|
| Article number | 12521877 |
