Valoi easy35 Slide Holder
The Valoi easy35 Slide Holder replaces the standard holder for the easy35, allowing you to scan 50 x 50 mm standard mounted 35mm slides.
€ 34. 00
Delivered within 2 to 3 working days
The Valoi easy35 Slide Holder replaces the standard holder for the easy35, allowing you to scan 50 x 50 mm standard mounted 35mm slides.
Reviews
Description
Valoi easy35 Slide Holder
The Valoi easy35 Slide Holder replaces the standard holder for the easy35, allowing you to scan 50 x 50 mm standard mounted 35mm slides.
The easy35 slide holder has two internal, custom-made leaf springs that push the slide down. This forces the slide into a placement area in the centre, ensuring consistent slide placement. Scanning slides is therefore as simple as placing one slide, capturing it and then pushing the first one out with the second slide as you place it.
The easy35 slide holder is compatible with most standard mounted 35mm slides on the market - however, Valoi cannot guarantee that it will work with all mounts ever made, as there is an extremely wide range. Particularly damaged or fragile cardboard slides may get jammed or damaged in the mount.
Mounted slides made of plastic and between 1.5 mm and 4 mm thick fit the device very well, and slides made of sturdy cardboard usually pose no problem.
Features of the Valoi easy35 Slide Holder
- Fast scanning with push-through design
- Ease of use
- Localisation mechanism for shorter post processing
- Compatible with most slides
- Scan slides up to 4 mm
- Uses two custom leaf springs to push the slide into place
- A centring function reduces post-processing time
- Slides are pushed through the holder by the next slide
- Length: 90 mm
- Width: 60 mm
- Height: 19 mm
- Weight: 14 grammes
- (Slides etc. are not included)
Package contents
- 1x Valoi easy35 Slide Holder
Valoi easy35 Slide Holder
The Valoi easy35 Slide Holder replaces the standard holder for the easy35, allowing you to scan 50 x 50 mm standard mounted 35mm slides.
The easy35 slide holder has two internal, custom-made leaf springs that push the slide down. This forces the slide into a placement area in the centre, ensuring consistent slide placement. Scanning slides is therefore as simple as placing one slide, capturing it and then pushing the first one out with the second slide as you place it.
The easy35 slide holder is compatible with most standard mounted 35mm slides on the market - however, Valoi cannot guarantee that it will work with all mounts ever made, as there is an extremely wide range. Particularly damaged or fragile cardboard slides may get jammed or damaged in the mount.
Mounted slides made of plastic and between 1.5 mm and 4 mm thick fit the device very well, and slides made of sturdy cardboard usually pose no problem.
Features of the Valoi easy35 Slide Holder
- Fast scanning with push-through design
- Ease of use
- Localisation mechanism for shorter post processing
- Compatible with most slides
- Scan slides up to 4 mm
- Uses two custom leaf springs to push the slide into place
- A centring function reduces post-processing time
- Slides are pushed through the holder by the next slide
- Length: 90 mm
- Width: 60 mm
- Height: 19 mm
- Weight: 14 grammes
- (Slides etc. are not included)
Package contents
- 1x Valoi easy35 Slide Holder
Specifications
| Info | |
|---|---|
| Article number | 12521876 |
| Info | |
|---|---|
| Article number | 12521876 |
